Setting VLAN dan ROUTER
SWITCH 1
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name risma
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#name maria
Switch(config-vlan)#exit
Switch(config)#interface fastEthernet 0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
SWITCH 0
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 30
Switch(config-vlan)#name paknarno
Switch(config-vlan)#exit
Switch(config)#vlan 40
Switch(config-vlan)#name masihsan
Switch(config-vlan)#exit
Switch(config)#interface fastEthernet 0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
ROUTER 1
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fastEthernet 0/0
Router(config-if)#ip address 192.168.10.10 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fastEthernet 0/1
Router(config-if)#ip address 192.168.5.5 255.255.255.128
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fastEthernet 0/0.30
Router(config-subif)#encapsulation dot1Q 30
Router(config-subif)#ip address 192.168.30.33 255.255.255.240
Router(config-subif)#exit
Router(config)#interface fastEthernet 0/0.40
Router(config-subif)#encapsulation dot1Q 40
Router(config-subif)#ip address 192.168.40.49 255.255.255.240
Router(config-subif)#exit
ROUTER 2
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fastEthernet 0/0
Router(config-if)#ip address 192.168.20.129 255.255.255.192
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fastEthernet 0/1
Router(config-if)#ip address 192.168.5.6 255.255.255.128
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fastEthernet 0/1.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip address 192.168.10.33 255.255.255.224
Router(config-subif)#exit
Router(config)#interface fastEthernet 0/1.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip address 192.168.20.65 255.255.255.224
Router(config-subif)#exit
SWITCH 3
Switch#en
Switch#vlan database
Switch(vlan)#vlan 10 name risma
VLAN 10 added:
Name: risma
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#vlan database
Switch(vlan)#vlan 20 name maria
VLAN 20 added:
Name: maria
Switch(vlan)#exit
APPLY completed.
Exiting....
TRUNK
Router 1
Switch>en
Switch#conf t
Switch(config)#interface fastEthernet 0/5
Switch(config-if)#switchport mode trunk
Router 2
Switch>en
Switch#conf t
Switch(config)#int fastEthernet 0/5
Switch(config-if)#switchport mode trunk
Router 3
Switch>en
Switch#conf t
Switch(config)#int fastEthernet 0/3
Switch(config-if)#switchport mode trunk
Sekian tutorial ini untuk melengkapi tugas kd.7 teknologi komputer dan jaringan
Tidak ada komentar:
Posting Komentar