CARA KONFIGURASI JARINGAN WIRELESS DENGAN CISCO PAKET TRACER

CARA KONFIGURASI JARINGAN WIRELESS DENGAN

CISCO PAKET TRACER

Langkahnya adalah :

  Router jenis 2811

Lalu pilih switch 2960

Ambil 3 Ip phone 

Lalu hubungkan kabel straight .. 

Colokkan kabel power adapter pada port Ip Phone

Jika sudah selesai silahkan masukkan konfigurasi switch, klik pada switch dan masuk ke Tab CLI seperti gambar di bawah ini

 Kemudian ketik kan perintah 

         Switch>en

Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int range fa0/1-24
Switch(config-if-range)#switchport voice vlan 1
Switch(config-if-range)#exit
Switch(config)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

s     Selanjutnya kita akan konfigurasi Router .. 

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip dhcp pool voice
Router(dhcp-config)#network 192.168.1.0 255.255.255.0
Router(dhcp-config)#
Router(dhcp-config)#default-router 192.168.1.1
Router(dhcp-config)#option 150 ip 192.168.1.1
Router(dhcp-config)#exit
Router(config)#ip dhcp excluded-address 192.168.1.1
Router(config)#int fastethernet 0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#telephony-service
Router(config-telephony)#max-ephones 3
Router(config-telephony)#max-dn 3
Router(config-telephony)#ip source-address 192.168.1.1 port 2000
Router(config-telephony)#auto 4 to 6
^
% Invalid input detected at '^' marker.

Router(config-telephony)#auto assign 4 to 6
Router(config-telephony)#auto assign 1 to 5
Router(config-telephony)#exit
Router(config)#ephone-dn 1
Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up

Router(config-ephone-dn)#number 132109
Router(config-ephone-dn)#
%IPPHONE-6-REGISTER: ephone-2 IP:192.168.1.3 Socket:2 DeviceType:Phone has registered.
%DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 192.168.1.3.
%DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 192.168.1.4.

Router(config-ephone-dn)#ephone-dn 2
Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up

Router(config-ephone-dn)#number 132110
Router(config-ephone-dn)#
%IPPHONE-6-REGISTER: ephone-3 IP:192.168.1.2 Socket:2 DeviceType:Phone has registered.

Router(config-ephone-dn)#ephone-dn 3
Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 3.1, changed state to up

Router(config-ephone-dn)#number 132111
Router(config-ephone-dn)#

%IPPHONE-6-REGISTER: ephone-1 IP:192.168.1.4 Socket:2 DeviceType:Phone has registered.

Lalu tes Koneksi jika lampu berkedip berarti berhasil ..

.